2014 Chrysler 300 Owner Manual SRT - Page 360

358 UNDERSTANDING YOUR INSTRUMENT PANEL pressing the Recirculation control button. The recircula- 2. Next, adjust the temperature you would like the system tion indicator will illuminate when this button is selected. to maintain by adjusting the driver and passenger temPush the button a second time to turn off the Recirculaperature hard or soft control buttons (7, 8, 13, 14). Once tion mode and allow outside air into the vehicle. the desired temperature is displayed, the system will achieve and automatically maintain that comfort level. NOTE: In cold weather, use of Recirculation mode may lead to excessive window fogging. The recirculation 3. When the system is set up for your comfort level, it is not necessary to change the settings. You will experifeature may be unavailable (soft-key button greyed out). ence the greatest efficiency by simply allowing the The Recirculation mode is not allowed in Defrost mode to system to function automatically. improve window clearing operation. Recirculation will be disabled automatically if this mode is selected. At- NOTE: tempting to use Recirculation while in this mode will cause the LED in the control button to blink and then turn • It is not necessary to move the temperature settings for cold or hot vehicles. The system automatically adjusts off. the temperature, mode, and blower speed to provide Automatic Temperature Control (ATC) comfort as quickly as possible. Automatic Operation • The temperature can be displayed in U.S. or Metric 1. Press the AUTO hard-key or soft-key button (4) on the Automatic Temperature Control (ATC) Panel. units by selecting the US/M customer-programmable feature. Refer to the "Uconnect® System Settings" in this section of the manual.