2014 Chrysler 300 Owner Manual SRT - Page 197

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 195 detects vehicle specific light and automatically switches To Activate from high beams to low beams until the approaching 1. Turn the headlight switch to the AUTO headlight vehicle is out of view. position. NOTE: 2. Push the multifunction lever away from you (toward front of vehicle) to engage the high beam mode. • Automatic High Beam Headlamp Control can be turned on or off using the Uconnect® System, refer to NOTE: This system will not activate until the vehicle is "Uconnect® Settings" in "Understanding Your Instruat or above 15 mph (35 km/h). ment Panel" for further information. To Deactivate • Broken, muddy, or obstructed headlights and taillights of vehicles in the field of view will cause headlights to 1. Pull the multifunction lever toward you (or rearward in car) to manually deactivate the system (normal remain on longer (closer to the vehicle). Also, dirt, film, operation of low beams). and other obstructions on the windshield or camera lens will cause the system to function improperly. 2. Push back on the multifunction lever once again to If the windshield or Automatic High Beam Headlamp reactivate the system. Control mirror is replaced, the mirror must be re-aimed to ensure proper performance. See your local authorized dealer. 3