1996 Ford Ranger Owner's Manual - Page 157
1996 Ford Ranger Manual
Page 157 highlights
Driving Your Ranger Once you place the gearshift securely into position, gradually release the brake pedal and use the accelerator as necessary. NOTE: Your vehicle is equipped with a brake-shift interlock feature. This feature prevents you from shifting from P (Park) unless you have the brake pedal depressed. (The ignition must be in the ON position.) If you cannot shift from P (Park) with the brake pedal depressed: 1. Apply the parking brake. 2. Remove the key. 3. Insert the key and rotate it one position clockwise (ignition in the OFF position). 4. Apply the brake pedal and shift to N (Neutral). (If the vehicle is shifted back to P [Park], you must repeat the previous steps.) 5. Start the vehicle. If you need to shift out of P (Park) by using the alternate procedure described above, it is possible that a fuse has blown and that your brakelamps may also not be functional. Please refer to the chapter titled Servicing Your Ranger in this Owner Guide for instructions on checking and replacing fuses. RWARNING DO NOT DRIVE YOUR VEHICLE UNTIL YOU VERIFY THAT THE BRAKELAMPS ARE WORKING. R (Reverse) With the gearshift in the R (Reverse) position, the vehicle will move backward. You should always come to a complete stop before shifting into or out of R (Reverse). 157