1996 Ford Ranger Owner's Manual - Page 159
1996 Ford Ranger Manual
Page 159 highlights
Driving Your Ranger Transmission control switch (located on the end of the gearshift lever) To return the transmission to the normal j Overdrive operation, press the transmission control switch again. The Transmission Control Indicator Light will not be illuminated when Overdrive operation resumes. This switch may be used to select O/D ON or O/D OFF any time the vehicle is being driven. When starting your vehicle, the overdrive system will automatically be in the normal overdrive mode. When to use 2 (Second) Use 2 (Second) to start-up on slippery roads or to provide additional engine braking on downgrades. This position provides 2 (Second) gear operation only. When to use 1 (Low) Use 1 (Low) to provide maximum engine braking on steep downgrades. Upshifts from 1 (Low) can be made by manually shifting to 2 (Second) or j (Overdrive). Selection of 1 (Low) gear provides only low gear operation from start-up. Selection of 1 (Low) while at higher speeds provides a shift to second gear, and a shift to first gear will occur after the vehicle decelerates to the proper speed. 159