2012 Ford Explorer Owner Guide 2nd Printing - Page 162

Seating and Safety Restraints Memory feature (if equipped) This system allows automatic positioning of the driver seat, power mirrors and power adjustable foot pedals (if equipped) to three programmable positions. The memory control is located on the driver's door. • To program position 1, move the memory features to the desired positions using the associated controls. Press and hold button 1 for at least two seconds. A chime will sound confirming that a memory position has been set. • To program position 2 and 3, repeat the previous procedure using the respective buttons. A memory position may be programmed at any time. To program the memory feature to a remote entry transmitter, refer to Remote entry system in the Locks and Security chapter. A programmed memory position can be recalled: • in any gearshift position if the ignition is not on. • only in P (Park) or N (Neutral) if the ignition is on. The memory positions are also recalled when you press your remote (unlock) control (if the transmitter is programmed entry transmitter to a memory position) or, when you enter a valid personal entry code that is programmed to a memory position. The mirrors will move to the programmed position and the seat will move to the easy entry position. The seat will move to the final position when the ignition is activated (if easy entry feature is enabled). Easy entry/exit feature (if equipped) This feature automatically moves the driver's seat rearward 2 in. (5 cm) when: • the transmission is in N (Neutral) or P (Park) • the key is removed from the ignition cylinder or the push button start system (if equipped) is switched off (refer to Push button start system in the Driving chapter). 162 2012 Explorer (exp) Owners Guide, 2nd Printing USA (fus)