2010 Honda Ridgeline Owner's Manual - Page 195

CD Changer (Models with navigation system) 2. The indicators above the disc buttons of the empty positions will blink, and the green load indicator above the CD slot comes on. 3. Insert a CD into the CD slot. Insert it only about halfway; the drive will pull it in the rest of the way. You will see ''BUSY'' in the display. The CD load indicator turns amber and blinks as the CD is loaded. You cannot load and play 3-inch (8-cm) discs in this system. 4. When ''LOAD'' appears again on the display, insert the next CD into the CD slot. Do not try to insert a disc until ''LOAD'' appears. You could damage the audio unit. 5. Repeat this until all six positions are loaded. The system will then begin playing the first CD loaded. If you stop loading CDs before all six positions are filled, the system will wait for 10 seconds, then stop the load operation and begin playing the last CD loaded. If you press the LOAD button while a CD is playing, the system will stop playing that CD and start the loading sequence. It will then play the CD just loaded. You can also load a CD into an empty position while a CD is playing by pressing the appropriate disc button. Select an empty disc button (the indicator above the button is off), and press the button. The system will stop playing the current CD and start the loading sequence. It will then play the CD just loaded. Text Data Display Function Each time you press the DISP button, the display shows you the text data on a disc, if the disc was recorded with text data. You can see the album, artist, and track name in the display. If a disc is recorded in MP3 or WMA, you can see the folder and file name, and the album, artist, and track tag. With the folder name, you will see the FOLD indicator in the display. The TRACK indicator is shown with the file or track name. When you press and release the DISP button while a disc without text data is playing, you will see ''NO INFO'' on the display. Features CONTINUED 191 2010 Ridgeline