2010 Honda Ridgeline Owner's Manual - Page 47

Installing a Child Seat Installing a Child Seat with LATCH Your vehicle is equipped with LATCH (Lower Anchors and Tethers for CHildren) at the rear seats. The lower anchors are located between the seat-back and seat bottom, and are to be used only with a child seat designed for use with LATCH. The location of each lower anchor is indicated by a small button above the anchor point. Whenever using the center tether anchor point, make sure to push down the head restraint to the lowest position, route the strap over the seat-back, then around the upper guide before attaching the tether strap hook to the center tether anchor (see page 48 ). BUTTON UPPER GUIDE Driver and Passenger Safety LATCH ANCHOR POINTS CENTER TETHER ANCHOR To install a LATCH-compatible child seat: 1. If needed, move the seat belt buckle or tongue away from the lower anchors. 2. Make sure there are no objects near the anchors that could prevent a secure connection between the child seat and the anchors. 3. On the center seating position When using the tether strap on the child seat, attach the tether strap hook to the center tether anchor before installing the child seat to the lower anchors for the LATCH system, because the center tether anchor is positioned behind the child seat. CONTINUED 43 2010 Ridgeline