2010 Honda Ridgeline Owner's Manual - Page 342
2010 Honda Ridgeline Manual
Page 342 highlights
Lights Replacing a Front Turn Signal/ Hazard/Parking Light Bulb 1. To change the passenger's side bulb, start the engine, turn the steering wheel all the way to the left, and turn off the engine. To change the driver's side bulb, turn the steering wheel to the right. HOLDING CLIPS BULB SOCKET 5. Insert the socket back into the headlight assembly. Turn it clockwise to lock it in place. 6. Turn on the lights to make sure the new bulb is working. 7. Put the inner fender cover in place. Install and lock each holding clip by pushing on the center. 3. Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise. 4. Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms. 2. Use a flat-tip screwdriver to remove the two holding clips from the inner fender, and pull the inner fender cover back. 338 2010 Ridgeline