2013 Jeep Grand Cherokee Owner's Manual - Page 184

182 UNDERSTANDING THE FEATURES OF YOUR VEHICLE The ventilated seat switches are used to control the speed of the fans located in the seat. Press the switch once to choose HIGH, press it a second time to choose LOW. Pressing the switch a Ventilated Seats - If Equipped third time will turn the ventilated seat On some models, both the driver and passenger seats are OFF. When HIGH speed is selected ventilated. Located in the seat cushion and seatback are both lights on the switch will be illuminated. When LOW small fans that draw the air from the passenger compart- speed is selected one light will be illuminated. ment and blow air through fine perforations in the seat NOTE: The engine must be running for the ventilated cover to help keep the driver and front passenger cooler seats to operate. in higher ambient temperatures. Vehicles Equipped With Remote Start There are two ventilated seat switches that allow the driver and passenger to operate the seats independently. On models that are equipped with remote start, the driver's The ventilated seat switches are located on the switch ventilated seat can be programmed to come on during a bank in the center stack of the instrument panel, just remote start. Refer to "Remote Starting System - If Equipped" in "Things To Know Before Starting Your below the climate controls. Vehicle" for further information. At that time, the number of illuminated LEDs changes from two to one, indicating the change. The LOW-level setting will turn OFF automatically after approximately 45 minutes.