2013 Jeep Grand Cherokee Owner's Manual - Page 333

UNDERSTANDING YOUR INSTRUMENT PANEL 331 Distance To Empty (DTE) Shows the estimated distance that can be traveled with the fuel remaining in the tank. This estimated distance is determined by a weighted average of the instantaneous and average fuel economy, according to the current fuel tank level. DTE cannot be reset through the SELECT button. Cruise Control Press and release the UP or DOWN button until "ACC" (if equipped with Adaptive Cruise Control) or "Cruise" is highlighted in the EVIC. Status of the ACC or Cruise is displayed in the menu line also. Press and release the SELECT (right arrow) button to display the following information: NOTE: Significant changes in driving style or vehicle • If equipped with ACC, one of several messages will be displayed giving a dynamic update of the status of the loading will greatly affect the actual drivable distance of feature as the driver changes feature status or following the vehicle, regardless of the DTE displayed value. conditions change. If ACC is active and a warning or When the DTE value is less than 30 miles (48 km) other feature is in the EVIC main display, the ACC status estimated driving distance, the DTE display will change will be displayed in place of the EVIC odometer line. to a "LOW FUEL" message. This display will continue until the vehicle runs out of fuel. Adding a significant • For vehicles with Cruise, one of several messages will be displayed giving a dynamic update of the status of amount of fuel to the vehicle will turn off the "LOW the feature as the driver changes feature status or FUEL" message and a new DTE value will display. conditions change. If Cruise is active and a warning or 4