2013 Jeep Grand Cherokee Owner's Manual - Page 329

UNDERSTANDING YOUR INSTRUMENT PANEL 327 If a problem is detected, the light will come on while the the indicator will continuously flash and a continuous engine is running. Cycle the ignition key when the chime will occur until the engine is allowed to cool. vehicle has completely stopped and the shift lever is If the light turns on while driving, safely pull over and placed in the PARK position. The light should turn off. stop the vehicle. If the A/C system is on, turn it off. Also, If the light remains lit with the engine running, your shift the transmission into NEUTRAL and idle the vevehicle will usually be drivable. However, see an autho- hicle. If the temperature reading does not return to rized dealer for service as soon as possible. If the light is normal, turn the engine off immediately and call for flashing when the engine is running, immediate service is service. Refer to "If Your Engine Overheats" in "What To required. You may experience reduced performance, an Do In Emergencies" for more information. elevated/rough idle or engine stall and your vehicle may • Transmission Temperature Warning Light require towing. This light indicates that there is excessive trans• Engine Temperature Warning Light mission fluid temperature that might occur This light warns of an overheated engine condiwith severe usage such as trailer towing. It may also occur when operating the vehicle in a high tion. As temperatures rise and the gauge approaches H, this indicator will illuminate and a single torque converter slip condition, such as 4-wheel-drive chime will sound after reaching a set threshold. Further operation (e.g., snow plowing, off- road operation). If this overheating will cause the temperature gauge to pass H, 4