2013 Jeep Grand Cherokee Owner's Manual - Page 457

STARTING AND OPERATING 455 4. Wait approximately 10 seconds. 5. Restart the engine. the transmission into 3 (third gear), the transmission will never shift above third gear, but will shift down into second and first gears normally. 6. Shift into the desired gear range. If the problem is no You can switch between DRIVE and ERS mode at any longer detected, the transmission will return to normal vehicle speed. When the shift lever is in the DRIVE operation. position, the transmission will operate automatically, NOTE: Even if the transmission can be reset, we recom- shifting between all available gears. Tapping the shift mend that you visit your authorized dealer at your lever to the left (-) will downshift the transmission, earliest possible convenience. Your authorized dealer has activate ERS mode, display the current gear in the diagnostic equipment to determine if the problem could instrument cluster, and maintain that gear as the top recur. If the transmission cannot be reset, authorized available gear. Once in ERS mode, tapping the shift lever to the left (-) or right (+) will change the top available dealer service is required. gears. Electronic Range Select (ERS) Operation To exit ERS mode, simply press and hold the shift lever to The Electronic Range Select (ERS) shift control allows the the right (+) until "D" is once again displayed in the shift driver to limit the highest available gear when the shift lever position indicator in the instrument cluster. lever is in the DRIVE position. For example, if you shift 5