2013 Jeep Grand Cherokee Owner's Manual - Page 196

194 UNDERSTANDING THE FEATURES OF YOUR VEHICLE A recall can be cancelled by pressing any of the MEMORY buttons during a recall (S, 1, or 2). When a recall is cancelled, the driver's seat, driver's mirror and the pedals stop moving. A delay of one second will occur • before another recall can be selected. Easy Entry/Exit Seat This feature provides automatic driver seat positioning to enhance driver mobility when entering and exiting the vehicle. rear stop. The seat will return to its previously set position when you place the ignition into the ACC or RUN position. When you remove the Key Fob from the ignition (or change the ignition to OFF, for vehicles equipped with Keyless Enter-N-Go), the driver seat will move to a position 0.3 in (7.7 mm) forward of the rear stop if the driver seat position is between 0.9 in and 2.7 in (22.7 mm and 67.7 mm) forward of the rear stop. The seat will return to its previously set position when you place the ignition to the ACC or RUN position. The distance the driver seat moves depends on where you have the driver seat positioned when you remove the Key Fob from the ignition (or change the ignition to OFF, • The Easy Entry/Easy Exit feature is disabled when the driver seat position is less than 0.9 in (22.7 mm) for vehicles equipped with Keyless Enter-N-Go). forward of the rear stop. At this position, there is no • When you remove the Key Fob from the ignition (or benefit to the driver by moving the seat for Easy Exit change the ignition to OFF, for vehicles equipped with or Easy Entry. Keyless Enter-N-Go), the driver seat will move about Each stored memory setting will have an associated Easy 2.4 in (60 mm) rearward if the driver seat position is Entry and Easy Exit position. greater than or equal to 2.7 in (67.7 mm) forward of the