2011 Kawasaki Teryx 750 FI 4x4 LE Owners Manual - Page 134
2011 Kawasaki Teryx 750 FI 4x4 LE Manual
Page 134 highlights
132 MAINTENANCE AND ADJUSTMENT More frequent inspection is necessary if the vehicle is subjected to hard usage. Causes of accelerated Belt Wear Avoid these hard usage conditions to obtain maximum belt life and prevent accelerated belt wear and deterioration. Operating the vehicle in high range while climbing hills, carrying heavy loads, or pulling a trailer. Exceeding maximum vehicle load or trailer weight. Operating in mud or water deeper than recommended. Operating in extremely dusty conditions. Continued operation with excessive belt slippage. Failure to apply the foot and hand brake controls while desending hills. WARNING Neglect, abuse, or failure to maintain the transmission can result in a severely worn or damaged drive belt locking up the transmission and wheels. As a result, operator can lose control and have an accident resulting in injury or death. Inspect the transmission at least every 180 days of vehicle use (average 20 km/day or 13 mi/day) not to exceed 4 000 km (2 500 mi) or 200-hour vehicle use, since drive belts wear with normal use. More frequent inspection is necessary if the vehicle is subjected to hard usage such as pulling a trailer, operating in mud or deep water, or in extremely dusty conditions. If excessive belt slippage occurs, do not drive the vehicle until damaged components are repaired. j Indications of Excessive Belt Slippage Excessive slippage will accelerate belt wear and lead to failure. Recognize these symptoms of excessive belt slippage. If excessive slippage occurs, do not continue to drive the vehicle until all damaged components are repaired. Smell of burning rubber. Visible white smoke. Sluggish initial acceleration or loss of power. Engine rpm is higher for the same vehicle speed. Engine vibration. Belt Protection System and Belt Indicator Light When the drive belt is subjected to such harsh usage, the belt protection system is activated and decreases the engine speed and the belt indicator light starts flashing to warn the operator. Stop using the vehicle under such harsh conditions. Refer to the "Multifunction Meter" section in the GENERAL INFORMATION chapter.