2015 Kawasaki Teryx4 CAMO Owners Manual - Page 55
2015 Kawasaki Teryx4 CAMO Manual
Page 55 highlights
54 GENERAL INFORMATION the seat frame mounting bolts and wash• Remove ers under the seat, and install them in the positions to suit the occupant's preference. The sensor for the seat-belt use reminder is built in the operator's seat belt buckle, and its leads are connected to the main harness. It is not required to disconnect the sensor leads during the seat position adjustment. Take care not to disconnect these leads. j A. Seat Frame Mounting Bolts and Washers B. Seat Frame the seat frame mounting bolts to the spec• Tighten ified torque. Tightening Torque Seat Frame 16.5 N·m (1.68 kgf·m, 12.2 ft·lb) Mounting Bolts The seat belt buckle is installed on the seat frame. The seat frame for the front passenger has the seat belt buckle on its left side and the seat frame for the operator has the seat belt buckle on its right side. A. Operator's Seat Belt Buckle B. Main Harness C. Sensor Leads ○If you need to disconnect the leads, NOTE do not forget to connect the leads when installing the seat frame. ○Check whether the seat-belt use reminder operates correctly after connecting the leads to the main harness.