2008 Mercedes CLK-Class Owner's Manual - Page 181
2008 Mercedes CLK-Class Manual
Page 181 highlights
Controls in detail Automatic transmission Extending gear range Briefly press the gear selector lever to the right in the D+ direction. The transmission will shift to the next higher gear as permitted by the shift program. This action simultaneously extends the gear range of the transmission. Shifting into optimal gear range Press and hold the gear selector lever in the D- direction. The transmission will automatically select the gear range suited for optimal acceleration and deceleration. This will involve shifting down one or more gears. Steering wheel gearshift control one-touch gearshifting* With the gear selector lever in drive position D and driving in program mode C or S, you can limit or extend the gear range. If your vehicle is equipped with manual shift program M, you can use the steering wheel gearshift control to manually shift the gears. i If you press on the accelerator when the engine has reached its rpm limit, the transmission will upshift beyond any gear range limit selected. i For information on using the steering wheel gearshift control in program mode M, see "Manual shift program CLK 63 AMG" ( page 182). Canceling gear range limit Press and hold the gear selector lever in the D+ direction until D reappears in the multifunction display ( page 174). The transmission will shift from the current gear range directly to gear range D. ! Allow engine to warm up under low load use. Do not place full load on the engine until the operating temperature has been reached. Shift into reverse gear R or park position P only when the vehicle is stopped. Avoid spinning of a drive wheel when driving off on slippery road surfaces. This may cause serious damage to the drivetrain which is not covered by the Mercedes-Benz Limited Warranty. 180