2008 Mercedes CLK-Class Owner's Manual - Page 449
2008 Mercedes CLK-Class Manual
Page 449 highlights
Practical hints Replacing bulbs Reinsert bulb holder 4 with the bulb in the lamp and turn clockwise. Align housing cover 2 and turn it clockwise. Front turn signal lamp bulb Turn bulb socket 1 counterclockwise and remove it. Press gently onto the bulb and turn counterclockwise out of bulb socket 1. Press the new bulb gently into bulb socket 1 and turn clockwise until it engages. Place bulb socket 1 back into the lamp and turn it clockwise. Parking and standing lamp bulb Turn housing cover 2 counterclockwise and remove it. Pull out bulb socket 5 with the bulb. Pull the bulb out of the bulb socket 5. Press the new bulb into bulb socket 5. Press bulb socket 5 back into the lamp. Align housing cover 2 and turn it clockwise. Additional turn signal lamps The additional turn signal lamps in the exterior rear view mirrors have LEDs. If a malfunction occurs or LEDs fail to function, the entire turn signal unit must be replaced. Have the additional turn signal unit replaced at an authorized Mercedes-Benz Center. Front side marker lamp Since replacing the side marker lamp bulbs is a technically highly demanding process, we recommend you have the side marker lamp bulbs replaced at an authorized Mercedes-Benz Center. Replacing bulbs for rear lamps Before you start to replace a bulb for a rear lamp, do the following first: Turn the exterior lamp switch to position M ( page 129). Tail lamp unit Open trunk lid. Swing the trim panel covering the corresponding rear lights to the side. 1 Connector 2 Tab Disconnect electrical connector 1. 448