2008 Mercedes CLK-Class Owner's Manual - Page 426

Practical hints Where will I find...? Tilt both plates upward 1. Fold the lower plate outward 2. Guide the tabs of the lower plate all the way into the openings of the base plate 3. For information on where to place wheel chocks when changing a wheel, see "Lifting the vehicle" ( page 459). Minispare wheel The Minispare wheel is located in the storage compartment underneath the trunk floor. Removing the Minispare wheel Lift up trunk floor cover and engage trunk floor handle in upper edge of trunk. Loosen the retaining screw in the middle of storage well casing by turning it counterclockwise ( page 422). Remove the storage well casing ( page 422). Example CLK coupe Storing the Minispare wheel Place Minispare wheel 3 in wheel well. Place vehicle tool kit storage well casing 4 over the Minispare wheel. Make sure arrow 2 on vehicle tool kit storage well casing 4 points in the direction of travel. Place storage well casing ( page 422) over vehicle tool kit storage well casing 4 and turn the retaining screw ( page 422) clockwise as far it will go to secure the Minispare wheel. 1 Vehicle tool kit Wheel wrench Jack 2 Arrow 3 Minispare wheel, Wheel bolts for Minispare wheel 4 Vehicle tool kit storage well casing Remove vehicle tool kit storage well casing 4. Remove Minispare wheel 3. i Arrow 2 on vehicle tool kit storage well casing 4 must point in the direction of travel. Otherwise you cannot place the storage well casing ( page 422) on top and secure the Minispare wheel with the retaining screw ( page 422). Disengage trunk floor handle in upper edge of trunk and lower trunk floor cover. 425