2008 Mercedes CLK-Class Owner's Manual - Page 54

Getting started Driving Starting difficulties If the SmartKey is left in starter switch position 0 for an extended period of time, it can no longer be turned in the switch. In this case, the steering is locked. To unlock, remove SmartKey from starter switch and reinsert. If the engine does not start as described, carry out the following steps: If you are starting the engine with the SmartKey, turn SmartKey in starter switch to position 0 and repeat starting procedure. If you are starting the engine with KEYLESS-GO*: Close any doors that may be open to allow for better detection of the SmartKey with KEYLESS-GO*. Or: Start the engine with the SmartKey as radio signals from another source may be interfering with the SmartKey with KEYLESS-GO*. Repeat the starting procedure ( page 51). Remember that extended starting attempts can drain the battery. Get a jump start ( page 467). If the engine does not start after several starting attempts, there could be a malfunction in the engine electronics or in the fuel supply system. Contact an authorized Mercedes-Benz Center or call Roadside Assistance. Parking brake Warning! G When leaving the vehicle, always remove the SmartKey or SmartKey with KEYLESS-GO* from the starter switch, take it with you, and lock the vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. Children could release the parking brake, which could result in an accident and/or serious personal injury. 1 Release handle 2 Parking brake pedal 53