2010 Mercedes C-Class Owner's Manual - Page 105
2010 Mercedes C-Class Manual
Page 105 highlights
Driving and parking Carry out the following steps: X 103 Driving off G Warning! On slippery road surfaces, never downshift in order to obtain braking action. This could result in drive wheel slip and reduced vehicle control. Your vehicle's ABS will not prevent this type of loss of control. If the engine does not start after several starting attempts: X Contact an authorized Mercedes-Benz Center or call Roadside Assistance. ! Do not run a cold engine at high engine speeds. Running a cold engine at high engine speeds may shorten the service life of the engine. This is not covered by the Mercedes-Benz Limited Warranty. C 63 AMG: At engine temperatures below 68‡ (20†), the engine's maximum speed is restricted in order to protect it from damage. Avoid driving your vehicle at full speed when the engine is cold to prevent premature engine wear and/or diminished comfort. ! If an acoustic warning sounds and the message Release Parking Brake appears in the multifunction display when driving off, you have forgotten to release the parking brake. Release the parking brake. ! Avoid spinning of a drive wheel. This may cause serious damage to the drivetrain which is not covered by the Mercedes-Benz Limited Warranty. ! Simultaneously depressing the accelerator pedal and applying the brakes reduces engine performance and causes premature brake and drivetrain wear which is not covered by the Mercedes-Benz Limited Warranty. i Once the vehicle is in motion, the automatic central locking function engages and the locking knobs in the doors move down. The engine does not start. You cannot hear the starter. The battery may not be charged sufficiently. X Get a jump start (Y page 323). If the engine will not start despite a jump start: X Contact an authorized Mercedes-Benz Center or call Roadside Assistance. The starter has been exposed to excessive temperatures. X Let the starter cool for about 2 minutes. X Repeat the starting procedure. If the engine does not start after several starting attempts: X Contact an authorized Mercedes-Benz Center or call Roadside Assistance. Z Controls in detail If you are starting the engine with the SmartKey: Turn the SmartKey in the starter switch to position 0 and repeat the starting procedure. X If you are starting the engine with KEYLESSGO: Close any doors that may be open to allow for better detection of the SmartKey. or X Remove the KEYLESS-GO start/stop button from the starter switch. X Start the engine with the SmartKey as radio signals from another source may be interfering with the KEYLESS-GO function. X Repeat the starting procedure.