2010 Mercedes C-Class Owner's Manual - Page 95

Lighting Combination switch High-beam flasher X 93 Switching on: Pull the combination switch briefly in direction of arrow =. Hazard warning flasher Turn signals X Press the combination switch in direction of arrow ; or ?. The corresponding turn signal indicator lamp ! or # in the instrument cluster flashes. The combination switch resets automatically after major steering wheel movements. To signal minor directional changes: X Press the combination switch only to the point of resistance in direction of arrow ; or ? and release. The corresponding turn signal lamps will flash three times. X Switching on: Press hazard warning flasher switch :. All turn signal lamps are flashing. High beam X Turn the exterior lamp switch to position L (Y page 90). X Switching on: Push the combination switch in direction of arrow :. The high-beam headlamp indicator lamp K in the instrument cluster comes on. X Switching off: Pull the combination switch in direction of arrow = to its original position. i With the hazard warning flasher activated and the combination switch set for either left or right turn, only the respective left or right turn signals will operate when the ignition is switched on. X Switching off: Press hazard warning flasher switch : again. i If the hazard warning flasher has been activated automatically, press hazard warning flasher switch : to switch it off. Headlamp cleaning system The headlamps will be cleaned with a highpressure water jet automatically when the engine is running and you have Rswitched i Also note the information on high-beam headlamps with activated automatic headlamp mode (Y page 91) or the daytime running lamp mode (Y page 91). on the headlamps Z Controls in detail The hazard warning flasher can be switched on at all times, even with the SmartKey removed from the starter switch. The hazard warning flasher comes on automatically when an air bag deploys.