2010 Mercedes E-Class Owner's Manual - Page 123
2010 Mercedes E-Class Manual
Page 123 highlights
Control system messages that may be stored in the system. Such messages appear in the multifunction display and are based on conditions or system status the vehicle's system has recorded. messages will be deleted from the message memory. 121 Settings menu Introduction In the Sett. menu there are two functions: The function Factory Setting (Y page 121), with which you can reset the settings to the original factory settings and a collection of submenus (Y page 122) with which you can make individual settings for your vehicle. G Warning! Malfunction and warning messages are only indicated for certain systems and are intentionally not very detailed. The malfunction and warning messages are simply a reminder with respect to the operation of certain systems. They do not replace the owner's and/or driver's responsibility to maintain the vehicle's operating safety. Have all required maintenance and safety checks performed on the vehicle. Bring the vehicle to an authorized Mercedes-Benz Center to address the malfunction and warning messages. X Resetting to factory settings You can reset most of the settings of the submenus to the factory settings. For safety reasons, the function Daytime Running Lamps in the Lights submenu cannot be reset while driving. X Press button = or ; to select the Sett. menu. X Press button = or ; to select the Serv. menu. If conditions have occurred causing status messages to be recorded, the number of messages appears in the multifunction display: Press button : or 9 to select the Factory Setting function. X Press button a. The function Reset All Settings? appears in the multifunction display. X Press button : or 9 to select the messages function. X Press button a to confirm. The stored messages will now be displayed in the order in which they have occurred. For malfunction and warning messages, see "Vehicle status messages in the multifunction display" (Y page 232). X Use button : or 9 to scroll through the messages. If you turn the SmartKey in the starter switch to position 0 and then back to position 2, all X Press button : or 9 to select Yes or No. Select Yes if you want to reset to factory settings. X Press button a to confirm. The confirmation message appears in the multifunction display. Z Controls in detail