2010 Mercedes E-Class Owner's Manual - Page 139
2010 Mercedes E-Class Manual
Page 139 highlights
Driving systems Setting the current speed X 137 i If you do not take your foot off of the accelerator pedal and continue to accelerate past the set speed, the following message will appear in the multifunction display: DISTRONIC PLUS Override The distance to a slower moving vehicle in front of you will not be set. Your vehicle speed will then be determined only by the accelerator pedal position. Changing the set speed G Warning! Keep in mind that it may take a brief moment until the vehicle has made the necessary adjustments. Increase or decrease the set vehicle speed to a value that the prevailing road conditions and legal speed limits permit. Otherwise, sudden and unexpected acceleration or deceleration of the vehicle could cause an accident and/ or serious injury to you and others. Adjustment in 5 mph (Canada: 10 km/h) increments i The set speed value is increased or decreased in 5 mph (Canada: 10 km/h) increments each time you lift or press the DISTRONIC PLUS lever up or down past the resistance point. X Increasing: Briefly lift the DISTRONIC PLUS lever up past the resistance point in direction of arrow :. X Decreasing: Briefly press the DISTRONIC PLUS lever down past the resistance point in direction of arrow ;. X Release the DISTRONIC PLUS lever. The new speed is set and the vehicle will accelerate or decelerate. Keep in mind that it may take a brief moment until the vehicle has reached the set speed. You can increase or decrease the set speed in 1 mph (Canada: 1 km/h) increments or in 5 mph (Canada: 10 km/h) increments. When you use the DISTRONIC PLUS lever to decelerate, the brake system will brake the vehicle automatically if the engine's braking power does not brake the vehicle sufficiently. Adjustment in 1 mph (Canada: 1 km/h) increments Setting stored speed (Resume function) G Warning! The set speed stored in memory should only be set again if prevailing road conditions and legal speed limits permit. Possible acceleration or deceleration differences arising from returning to the preset speed could cause an accident and/or serious injury to you and others. i The set speed value is increased or decreased in 1 mph (Canada: 1 km/h) Z Controls in detail Accelerate or decelerate to the desired speed. X Briefly lift the DISTRONIC PLUS lever in direction of arrow : or depress in direction of arrow ; (Y page 134). The current speed is set. X Remove your foot from the accelerator pedal. increments each time you lift or press the DISTRONIC PLUS lever up or down to the resistance point. X Increasing: Briefly lift the DISTRONIC PLUS lever up to the resistance point in direction of arrow :. X Decreasing: Briefly press the DISTRONIC PLUS lever down to the resistance point in direction of arrow ;. X Release the DISTRONIC PLUS lever. The new speed is set and the vehicle will accelerate or decelerate.