2010 Mercedes E-Class Owner's Manual - Page 279
2010 Mercedes E-Class Manual
Page 279 highlights
Replacing bulbs recommended to have such work done by a qualified technician. 277 Low beam (halogen headlamps only) Before you start to replace a bulb for a front lamp, do the following: X Switch off the ignition. X Turn the exterior lamp switch to position $. X Open the hood (Y page 188). Releasing/fixing the washer fluid reservoir To replace bulbs of the driver's side headlamp, the washer fluid reservoir in the engine compartment must be released. X Releasing: Turn screw ; counterclockwise and remove it. X Tilt washer fluid reservoir : to the side as far as necessary to access the headlamp bulbs. X Fixing: Tilt washer fluid reservoir : back into fixing position. X Fasten screw ; by turning it clockwise. High beam (halogen headlamps only) or Corner-illuminating lamp (Bi-Xenon headlamps only) Z Practical hints X Driver's side only: Release the washer fluid reservoir (Y page 277). X Turn housing cover : counterclockwise and remove it. X Turn bulb socket ; counterclockwise and pull it out. X Pull the bulb out of bulb socket ;. X Insert the new bulb into bulb socket ;. X Insert bulb socket ; into the housing and turn it clockwise. X Align housing cover : and turn it clockwise. X Driver's side only: Fix the washer fluid reservoir (Y page 277).
![](/manual_guide/autos/2010-mercedes-eclass-owners-manual-f2d2873/279.png)