2010 Mercedes E-Class Owner's Manual - Page 234

232 X Vehicle status messages in the multifunction display Turn the crank handle in the direction of arrow as far as it will go. X Remove luggage bowl ; by turning it counterclockwise. X Remove spare wheel :. Storing the spare wheel after use X Place spare wheel : into the spare wheel well. X Secure spare wheel : by turning luggage bowl ; clockwise. Practical hints Operational position X Vehicle status messages in the multifunction display Notes Warning and malfunction messages appear in the multifunction display located in the instrument cluster. Certain warning and malfunction messages are accompanied by an audible signal. Address these messages accordingly and follow the additional instructions given in this Operator's Manual. High-priority messages appear in the multifunction display in red color. Certain messages of high priority cannot be cleared from the multifunction display using a or % on the multifunction steering wheel (Y page 112). Other messages of high priority and messages of less immediate priority can be cleared from the multifunction display using a or %. They are then stored in the vehicle status message memory (Y page 120). Remember that clearing a message will only make the message disappear. Clearing a message will not correct the condition that caused the message to appear. Turn the crank handle clockwise. Before placing the jack back into the vehicle tool kit: X X Fully collapse the jack. Fold in the crank handle (storage position). Spare wheel The spare wheel is located in the space underneath the trunk floor. X Removing: Open the trunk (Y page 76). X Lift the trunk floor and secure it on the upper trunk lip (Y page 230). G Observe Safety notes, see page 279. ! To prevent damage, always disengage the floor handle from the upper trunk lip and lower the trunk floor before closing the trunk. G Warning! All categories of messages contain important information which should be taken note of and, where a malfunction is indicated,