2011 Mercedes CL-Class Owner's Manual - Page 226

224 Video DVD playback conditions If video DVDs do not correspond to the NTSC or PAL TV playback standards, there may be picture/sound interference or other playback problems. COMAND can play back video DVDs produced according to the following standards: Rregion Activating video DVD mode Option 1 X Insert a video DVD. COMAND loads the medium inserted and starts to play it. Option 2 X Select Video in the main function bar by sliding ZV and turning cVd the COMAND controller and press W to confirm. Video DVD mode is switched on. code 1 or region code 0 (no region code) i If you insert a video DVD with a different region code, you will see a message to this effect. RPAL or NTSC standard You will generally find the relevant details either on the DVD itself or on the DVD case. i COMAND is set to region code 1 at the factory. This setting can be changed at an authorized Mercedes-Benz Center. This will allow you to play video DVDs with a different region code, provided that they are produced in accordance with the PAL or NTSC standard. The region code can be changed a maximum of five times. Function restrictions Depending on the DVD, it is possible that certain functions or actions will be temporarily blocked or may not function at all. As soon as you try to activate these functions or actions, you will see the K symbol in the display. COMAND Hiding/showing the control menu X To show: turn cVd or slide ZVÆ the COMAND controller. i This function is not available while the DVD's own menu (Y page 227) is being displayed. X To hide: slide ZVÆ the COMAND controller. or X Wait for approximately eight seconds. Inserting and removing DVDs X Proceed as described in the "Inserting and ejecting CDs and DVDs" section (Y page 204). Control menu displayed : Date medium type ; Current track = Current scene ? Track time A To show the menu