2011 Mercedes CL-Class Owner's Manual - Page 434
2011 Mercedes CL-Class Manual
Page 434 highlights
432 Towing and tow-starting X Switch on the hazard warning flashers (Y page 248). X Turn the SmartKey to position 0 in the ignition lock and remove the SmartKey. X When leaving the vehicle, take the SmartKey or the KEYLESS-GO key with you. Towing vehicles with both axles on the ground When having your vehicle towed, observe the important safety notes (Y page 430). G Warning Roadside Assistance X X X Press the mark on cover : inwards, in the direction of the arrow. Take cover : off the opening. Screw the towing eye in clockwise to the stop and tighten it. With the engine not running, there is no power assistance for the brake and steering systems. In this case, it is important to keep in mind that a considerably higher degree of effort is necessary to brake and steer the vehicle. Adapt your driving accordingly. Removing the towing eye X X Loosen the towing eye and unscrew it. The automatic transmission automatically shifts to position P when you open the driver's or front-passenger door or when you remove the SmartKey from the ignition lock. In order to ensure that the automatic transmission stays in position N when towing, do the following: X Attach cover : to the bumper and press until it engages. X Place the towing eye in the vehicle tool kit. Towing the vehicle with the rear axle raised Only possible for vehicles without 4MATIC. When having your vehicle towed with the rear axle raised, observe the important safety notes (Y page 430). ! The ignition must be switched off if you are towing the vehicle with the rear axle raised. Intervention by ESP® could otherwise damage the brake system. Make sure that the vehicle is stationary and that the SmartKey is in position 0 in the ignition lock. X Turn the SmartKey to position 2 in the ignition lock. On vehicles with KEYLESS-GO, use the SmartKey instead of the Start/Stop button (Y page 267). X Depress and hold the brake pedal. X Shift the automatic transmission to position N. X Release the brake pedal. X Release the electric parking brake. X Switch on the hazard warning flashers (Y page 248). X Leave the SmartKey inserted in the ignition lock in position 2.