2011 Mercedes CL-Class Owner's Manual - Page 400
2011 Mercedes CL-Class Manual
Page 400 highlights
398 Features 1. The device must not cause harmful interference. 2. The device must withstand any interference received, including interference that may cause undesired operation. Unauthorized modification of this device could void the device's operating permit. Garage door remote control A is not part of the garage door opener. i To achieve the best result, insert new batteries in garage door remote control A of your garage door drive before programming. X i Canada only: This device complies with the RSS-210 requirements of Industry Canada. Operation is subject to the following two conditions: 1. The device must not cause harmful interference. 2. The device must withstand any interference received, including interference that may cause undesired operation. Unauthorized modification of this device could void the user's authority to legally operate the device. Programming the remote control Programming Erase the memory of the integrated remote control (Y page 400) before programming it for the first time. X Turn the key to position 2 in the ignition lock. X Press and hold one of transmitter buttons ; to ? on the integrated remote control. After a short time, indicator lamp : will start flashing. It flashes about once per second. i Indicator lamp : flashes immediately the first time that the transmitter button is programmed. If this transmitter button has already been programmed, indicator lamp : will only start flashing at a rate of once per second after 20 seconds have elapsed. X X Loading, stowing and features G Warning! Only press the transmitter button on the integrated remote control if there are no persons or objects present within the sweep of the garage door. People could otherwise be injured by the movement of the door. Keep the transmitter button depressed. Point transmitter button B of garage door remote control A towards the transmitter buttons on the rear-view mirror at a distance of 2 to 12 inches (5 to 20 cm). i The distance between garage door remote control A and the integrated garage door opener depends on the system of the garage door drive. You might require several attempts. You should test every position for at least 20 seconds before trying another position. X Remote control in the rear-view mirror Keep transmitter button B on garage door remote control A pressed until indicator lamp : starts to flash rapidly. The programming has been successful if indicator lamp : flashes rapidly. X Release transmitter buttons ;, = or ? on the integrated remote control and