1999 Nissan Quest Owner's Manual - Page 152

the instrument panel registers. The indicator light comes on, and the display window shows the set temperature. The EATC heats the air if the selected temperature is warmer than the outside air coming into the vehicle. However, the air is not cooled regardless of the temperature setting, unless the A/C button is selected. vehicle. However, the air is not cooled regardless of the temperature setting, unless the A/C button is selected. Push this button to get air from the front and rear floor outlets and instrument panel ventilators at the same time. The indicator light comes on and the display window shows the set temperature. The EATC heats the air if the selected temperature is warmer than the outside air coming into the vehicle. However, the air is not cooled regardless of the temperature setting, unless the A/C button is selected. Press the MAX button to choose air recirculation. In this mode the EATC system recirculates the air inside the vehicle rather than drawing air from outside. Air is distributed through the instrument panel ventilators similar to mode. Use this mode to rapidly cool the inside of the vehicle, or to dehumidify the air inside the vehicle. AHA1143 ENGLISH/METRIC MODE Activate the air conditioner in any of the override modes listed above by pressing the A/C button. The A/C indicator light comes on to verify activation, and cooled air flows from the vents. Fan speed continues to be controlled by the EATC unless the fan speed thumbwheel is used to override. Switch from English to metric temperature display by simultaneously pressing the and A/C buttons and holding the thumbwheel in upper position (HI) for one second. Push this button to direct airflow to the front and rear floor outlets. The indicator light comes on, and the display window shows the set temperature. The EATC heats the air if the selected temperature is warmer than the outside air coming into the Heater, air conditioner and audio systems 4-13