1999 Nissan Quest Owner's Manual - Page 159

window. When the indicator bar is in the center position the sound is equally distributed between the right and left speakers. Following balance adjustment, the display window shows the current setting for three seconds, then returns to the display prior to adjustment. COMP button Press this button to activate the compression function. This reduces the dynamic range, which provides the listener with a more consistent level of volume. The display window shows a C when the COMP button is pushed. of 60 minutes or shorter in length. ● Cassette tapes should be removed from the player when not in use. Store cassettes in their protective cases and away from direct sunlight, heat, dust, moisture, and magnetic sources. ● Direct sunlight can cause the cassette to become deformed. The use of deformed cassettes may cause the cassette to jam in the player. ● Do not use cassettes with loose labels which are peeling and loose. If used the label could jam in the player. ● If a cassette has loose tape, insert a pencil through one of the cassette hubs and rewind the tape firmly around the hubs. Loose tape may cause tape jamming and wavering sound quality. ● Over a period of time, the playback head, capstan and pinch roller may collect a tape coating residue as the tape is played. This residue accumulation can cause weak or wavering sound, and should be removed periodically with a head cleaning tape. If the residue is not removed periodi- Fader Fader control allows you to adjust sound distribution between the front and rear speakers. Push the FADE button and the setting indicator bar appears in the display window. Press the SELECT button to shift the sound to the front speakers. The single indicator bar moves to the right of the display window. Press the SELECT button to shift the sound to the rear speakers. The single indicator bar moves to the left of the display window. When the indicator bar is in the center position the sound is equally distributed between the front and rear speakers. Following fader adjustment, the display window shows the current setting for three seconds, then returns to the display prior to adjustment. CASSETTE TAPE OPERATION Turn the ignition to ACC or ON, and carefully insert a cassette tape into the tape door. The cassette tape automatically pulls into the player and begins to play. When a casssette is inserted into the audio system, the word TAPE and a cassette side symbol (either one or two) illuminates in the display. If the radio is already operating it automatically turns off and the cassette tape begins to play. The cassette tape automatically changes direction to play the other side when the first side is complete. Precautions on cassette player operation ● To maintain good quality sound, Nissan recommends using cassette tapes 4-20 Heater, air conditioner and audio systems