1999 Nissan Quest Owner's Manual - Page 41

positioned properly and fastened to the buckle mounted in the middle of the seat. When the two buckle seat belt system is not in use, the webbing can be secured with the seat belt clip. The seat belt clip should not be used with a child seat or during seat belt usage. The seat belt clip opening should face the front of the vehicle. When the two-passenger bench seat is removed from the vehicle, you must detach the single window tongue from the auxiliary buckle. If the three-passenger bench seat is moved up to the second row position, the outside passenger (near the passenger side sliding door) only needs to use the double window tongue and the standard buckle. Because the three-passenger bench seat is wider and closer to the passenger side sliding door, the single window seat belt tongue and the auxiliary buckle are not necessary. ARS1126 A twisted belt may prevent the retractor from working properly. If the two buckle seat belt system is twisted, disengage the single window tongue from the auxiliary buckle on the side of the seat, remove the twist and reinstall the tongue into the auxiliary buckle until you hear a snap and feel the latch engage. Both tongues must be attached to their appropriate buckles whenever someone is riding in that seating position. If the tongue are released to allow a third row passenger to enter or exit, the tongues must be reattached. 1-34 Seats, restraints and supplemental air bag systems