1999 Nissan Quest Owner's Manual - Page 166

Precautions on cassette player operation ● To maintain good quality sound, Nissan recommends using cassette tapes of 60 minutes or shorter in length. ● Cassette tapes should be removed from the player when not in use. Store cassettes in their protective cases and away from direct sunlight, heat, dust, moisture, and magnetic sources. ● Direct sunlight can cause the cassette to become deformed. The use of deformed cassettes may cause the cassette to jam in the player. ● Do not use cassettes with loose labels which are peeling and loose. If used the label could jam in the player. ● If a cassette has loose tape, insert a pencil through one of the cassette hubs and rewind the tape firmly around the hubs. Loose tape may cause tape jamming and wavering sound quality. ● Over a period of time, the playback head, capstan and pinch roller may collect a tape coating residue as the tape is played. This residue accumulation can cause weak or wavering sound, and should be removed periodically with a head cleaning tape. If the residue is not removed periodically, the player may need to be disassembled for cleaning. This system searches for the blank intervals between selections. If there is a blank interval within one program or there is no interval between programs, the system may not stop in the desired or expected location. Changing the direction of tape play Push the SIDE 1-2 select button to switch sides on the tape. The display will change from TAPE 1 PLAY to TAPE 2 PLAY. REW and FF Push the REW or FF button for the desired direction. When REW is pushed TAPE 1 REW illuminates on the display (TAPE 2 REW will illuminate if on side 2). When FF is pushed TAPE 2 FF illuminates on the display (TAPE 2 FF will illuminate if on side 2). To stop the FF or REW function, press the FF or REW button again or the TAPE button. Playing and stopping the cassette tape Push the CD, AM, or FM button while the cassette tape is playing to stop the tape. Push the button again to play the tape. Dolby NR (noise reduction) Push the button for Dolby NR encoded tapes to reduce high frequency tape noise. appears in the disWhen activated, a play window. Dolby NR is manufactured under license from Dolby Laboratories Licensing Corporation. ''Dolby NR'' and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Automatic Music Search (AMS) Pushing the seek button while playing a cassette tape activates the Automatic Music Search (AMS) mode. Press SEEK to rewind the tape to the previous selection, or press SEEK to forward the tape to the nest selection. Heater, air conditioner and audio systems 4-27