2003 Nissan Murano Owner's Manual - Page 115
2003 Nissan Murano Manual
Page 115 highlights
fuse blows, the memory will be canceled. In such a case, reset the desired positions using the following procedures. 1. Open and close the driver's door more than two times with the ignition key in the LOCK position. 2. Reset the desired position using the previous procedure. work or will stop operating under the following conditions: ¼ when the vehicle speed is above 4 MPH (7 km/h). ¼ when either of the memory switches is pressed while the automatic drive positioner is operating. ¼ when the adjusting switch for the driver's seat, pedal or outside mirror is turned on while the automatic drive positioner is operating. ¼ when the memory switch 1 or 2 is not pushed for at least 1 second. ¼ when the seat, pedal and outside mirror has already been moved to the memorized position. ¼ when no seat position is stored in the memory switch. Selecting the memorized position 1. Set the selector lever to the P (Park) position. 2. Turn the ignition ON. 3. Push the memory switch 1 or 2 fully for at least 1 second. The driver's seat, pedals and outside mirror will move to the memorized position with the indicator light flashing. Then the light will stay on for approximately 5 seconds. Cancellation of the system The automatic drive positioner system can be canceled. See "4. Display screen, heater, air conditioner and audio systems" section. System operation The automatic drive positioner system will not 3-18 Pre-driving checks and adjustments