2003 Nissan Murano Owner's Manual - Page 207

CVT FLUID Contact your NISSAN dealer if checking or replacement is required. POWER STEERING FLUID BRAKE FLUID CAUTION ¼ Use only Genuine NISSAN CVT Fluid NS-2. Do not mix with other fluids. ¼ Using transmission fluid other than Genuine NISSAN CVT Fluid NS-2 will damage the CVT transmission, which is not covered by the NISSAN new vehicle limited warranty. SDI1443 SDI1502 The specified CVT fluid is also described on caution labels located in the engine compartment. Check the fluid level in the reservoir tank. The fluid level should be checked using the HOT range at fluid temperatures of 122 to 176°F (50 to 80°C) or using the COLD range at fluid temperatures of 32 to 86°F (0 to 30°C). Check the fluid level in the reservoir. If the fluid is below the MIN line or the brake warning light comes on, add DOT 3 fluid up to the MAX line. If fluid must be added frequently, the system should be thoroughly checked by your NISSAN dealer. CAUTION ¼ Do not overfill. ¼ Use Genuine Nissan PSF or equivalent. WARNING Use only new fluid. Old, inferior, or contaminated fluid may damage the brake system. The use of improper fluids can damage the brake system and affect the 8-12 Maintenance and do-it-yourself