2013 Nissan GT-R Owner's Manual - Page 109

DRIVE COMPUTER after the system check is finished. Release the button and push it again to operate the shift lever. . During winter or at other times when the temperature is extremely low, changes in the hydraulic response characteristic s may increase the amount of time that is required for the system check. During the system check, a thudding operating noise may occur or the engine speed may decrease, however this does not indicate that there is a malfunction. 1. ENTER switch 2. NEXT switch 3. Vehicle information display . Setting . Warning 3 The vehicle information display * can be changed when the ignition switch is in the ON 1 to position. Push the ENTER switch * change the display. NOTE: . The cruise control display is shown if cruise control is set. ( "Cruise control" page 5-34) . The warning display is not shown if there are no conditions to warn the driver. Depending on the driving conditions and other factors, the displayed values may differ from the actual values. The position of the speedometer needle and the speed shown in the vehicle information display may slightly differ. . The drive computer displays the following information: ...Current fuel consumption Vehicle speed Cruise control Average fuel consumption and speed Elapsed time and trip computer Distance to empty Outside air temperature . 2-14 Instruments and controls