2013 Nissan GT-R Owner's Manual - Page 115

Input the maintenance distance using the following items: . On each setting screen, push the NEXT switch to change the mileage. Push and hold the switch to increase the number every 600 miles (1,000 km). Set to "-" to set no reminders. To reset the accumulated mileage to zero, go to the RESET screen, then push the NEXT switch and confirm with the . ENTER switch . . Maintenance This function can be used to set the various maintenance intervals and to check the engine oil level. The reminders shown below are used to notify the driver of the maintenance intervals. NOTE: Because these are displayed based on the mileage driven, they do not indicate the actual conditions of the vehicle. Use these functions only as a reference. NOTE: . To restore the mileage to the original figure after resetting, push the NEXT switch again. . When the battery terminal is disconnected, the set mileage will be erased and the settings will return to their default settings. Engine oil level: This can be used to check the pre-start oil level while the engine is running. Select SETTING > MAINTENANCE > OIL > ENGINE OIL > LEVEL. If the low level reminder appears, check the level using the engine oil dipstick. ( "Checking engine oil level" page 8-12) 2-20 Instruments and controls