2013 Nissan GT-R Owner's Manual - Page 203

IGNITION SWITCH POSITIONS LOCK (Normal parking position) The ignition switch can only be locked in this position. The ignition switch will be unlocked when it is pushed to the ACC position while carrying the Intelligent Key or with the Intelligent Key inserted in the port. ACC (Accessories) This position activates electrical accessories such as the radio, when the engine is not running. OPERATING RANGE FOR ENGINE START The operating range for starting the engine inside the vehicle is shown in the illustration. . If the Intelligent Key is on the instrument panel, rear parcel shelf, inside the glove box, door pocket, cup holders or console box, or the corner of the passenger compartment, it may not be possible to start the engine. Carry the Intelligent-Key and try to start the engine again. If the Intelligent Key is near the door or door glass outside the vehicle, it may be possible to start the engine. IGNITION SWITCH OPERATION When the Intelligent Key is carried with you and the ignition switch is pushed without depressing the brake pedal, the ignition switch position will change as follows: ...Push center once to change to ACC. Push center two times to change to ON. Push center three times to change to OFF. (No position illuminates.) Push center four times to return to ACC. Open or close any door to return to LOCK during the OFF position. ON (Normal operating position) This position turns on the ignition system and electrical accessories. OFF The engine can be turned off without locking the steering wheel. The ignition lock is designed so that the ignition switch cannot be switched to the LOCK position P position. until the shift lever is moved to the & . 5-10 Starting and driving