1997 Oldsmobile Silhouette Owner's Manual - Page 161

1997 Oldsmobile Silhouette Manual

Page 161 highlights

Automatic Compass Calibration The compass is self-calibrating which eliminates the need to manually set the compass. When the vehicle is new, the calibration process may not be complete. In these cases the calibration symbol, C, will be displayed where the compass reading is normally displayed. To calibrate the compass: In an area free from large metal objects, make three 360" turns. The calibration symbol will turn off and the compass reading will be displayed. Manual Compass Calibration If the compass appears erraticand the calibration symbol does not appear, you must manually put the compass into the calibration mode. Turn the ignition on and cycle the DIC to the CompadTernperature mode. Press both the E/M and MODE buttons forat least 10 seconds until the calibration symbol appears. Release both buttons and complete three 360" turns in an area free from large metal objects. The calibration symbol will turn off and the compass reading will be displayed. Error Displays An error of the vehicle's speed sensor or fuel sender will cause -E- to be displayed. 0 In the absence of vehicle communications, a double dash, --,is displayed. Trip Computer There are five trip computer displays which may be stepped through by pushing the MODE button. The information will appear in the following order: 0 0 0 0 0 Average Fuel Economy (AVG ECON) - This shows the average fuel economy since the last reset. Instantaneous Fuel Economy (INST ECON) - This shows fuel economy for the most recent second of driving. Trip Range (RANGE)- This shows the estimated distance that can be traveled with the remaining fuel. The fuel economy used to calculate range is based on the last few hours of driving. Trip Fuel Used (FUEL USED) - This shows the accumulated fuel used since the last reset. Average Speed (AVG SPEED) - This shows the average speed since the last reset. Resetting the Trip Computer Press and hold the MODE and E/M buttons for at least two seconds. The reset is acknowledged with the display showing all segments on for a period of half a second. A reset can only be done in AVG ECON, FUEL USED and AVG SPEED displays. Resetting affects all three displays regardless of what display you are in.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211
  • 212
  • 213
  • 214
  • 215
  • 216
  • 217
  • 218
  • 219
  • 220
  • 221
  • 222
  • 223
  • 224
  • 225
  • 226
  • 227
  • 228
  • 229
  • 230
  • 231
  • 232
  • 233
  • 234
  • 235
  • 236
  • 237
  • 238
  • 239
  • 240
  • 241
  • 242
  • 243
  • 244
  • 245
  • 246
  • 247
  • 248
  • 249
  • 250
  • 251
  • 252
  • 253
  • 254
  • 255
  • 256
  • 257
  • 258
  • 259
  • 260
  • 261
  • 262
  • 263
  • 264
  • 265
  • 266
  • 267
  • 268
  • 269
  • 270
  • 271
  • 272
  • 273
  • 274
  • 275
  • 276
  • 277
  • 278
  • 279
  • 280
  • 281
  • 282
  • 283
  • 284
  • 285
  • 286
  • 287
  • 288
  • 289
  • 290
  • 291
  • 292
  • 293
  • 294
  • 295
  • 296
  • 297
  • 298
  • 299
  • 300
  • 301
  • 302
  • 303
  • 304
  • 305
  • 306
  • 307
  • 308
  • 309
  • 310
  • 311
  • 312
  • 313
  • 314
  • 315
  • 316
  • 317
  • 318
  • 319
  • 320
  • 321
  • 322
  • 323
  • 324
  • 325
  • 326
  • 327
  • 328
  • 329
  • 330
  • 331
  • 332
  • 333
  • 334
  • 335
  • 336
  • 337
  • 338
  • 339
  • 340
  • 341
  • 342
  • 343
  • 344
  • 345
  • 346
  • 347
  • 348
  • 349
  • 350
  • 351
  • 352
  • 353
  • 354
  • 355
  • 356
  • 357
  • 358
  • 359
  • 360
  • 361
  • 362
  • 363
  • 364
  • 365
  • 366
  • 367
  • 368
  • 369
  • 370
  • 371
  • 372
  • 373
  • 374
  • 375
  • 376
  • 377
  • 378
  • 379
  • 380
  • 381
  • 382
  • 383
  • 384
  • 385
  • 386
  • 387
  • 388
  • 389
  • 390
  • 391
  • 392
  • 393
  • 394
  • 395
  • 396
  • 397
  • 398
  • 399
  • 400
  • 401
  • 402
  • 403
  • 404
  • 405
  • 406
  • 407
  • 408
  • 409
  • 410
  • 411
  • 412
  • 413
  • 414
  • 415
  • 416
  • 417
  • 418
  • 419
  • 420
  • 421
  • 422
  • 423
  • 424
  • 425
  • 426
  • 427
  • 428
  • 429
  • 430
  • 431
  • 432
  • 433
  • 434
  • 435
  • 436

Automatic
Compass
Calibration
The
compass is self-calibrating which eliminates
the
need to manually set
the
compass. When the vehicle is
new,
the
calibration process may
not be complete.
In
these cases the calibration symbol,
C,
will be displayed
where
the
compass
reading is normally displayed.
To
calibrate
the
compass:
In
an area
free
from
large
metal
objects,
make
three
360"
turns. The calibration
symbol
will
turn
off
and
the
compass
reading
will
be
displayed.
Manual
Compass
Calibration
If
the compass
appears
erratic and the calibration
symbol
does not appear, you must manually put
the
compass into the calibration mode.
Turn the ignition on and cycle the DIC to the
CompadTernperature mode.
Press both the E/M and
MODE
buttons
forat least
10
seconds
until
the
calibration symbol
appears. Release both buttons and
complete three
360"
turns
in
an area free
from large
metal objects.
The
calibration symbol will
turn
off and
the compass reading will be displayed.
Error
Displays
An
error of the vehicle's speed sensor or fuel sender
0
In
the
absence
of
vehicle communications,
a
double
will cause
-E-
to be displayed.
dash,
--,
is
displayed.
Trip
Computer
There
are
five
trip
computer
displays
which may be
stepped through by pushing the MODE button. The
information will appear
in
the following
order:
0
0
0
0
0
Average
Fuel Economy (AVG ECON)
-
This
shows
the
average
fuel economy since the last reset.
Instantaneous Fuel Economy (INST
ECON)
-
This
shows
fuel economy for
the most recent second
of
driving.
Trip
Range
(RANGE)
-
This
shows the estimated
distance that can be traveled with the remaining fuel.
The fuel economy used to calculate
range is based on
the last few hours
of
driving.
Trip Fuel Used (FUEL
USED)
-
This
shows the
accumulated fuel used since the last reset.
Average Speed (AVG
SPEED)
-
This
shows the
average speed since the last reset.
Resetting
the
Trip
Computer
Press and hold the MODE and
E/M
buttons for at least
two seconds.
The reset
is
acknowledged with the display
showing all segments on for
a period of
half
a
second.
A
reset can only be
done
in
AVG ECON,
FUEL USED
and AVG
SPEED
displays. Resetting affects
all
three
displays regardless of what display you are in.