1997 Oldsmobile Silhouette Owner's Manual - Page 335

Taillamps 1. Open the liftgate. 2. Remove the two screws from the taillamp housing on theinboard side. 3. P l off the entire taillamp housing. locator/retaining ul The pins on the outboard sideare part of the lamp assembly and will remain intact during removal. 7. To replace the lamp assembly, line up and insert the tabs on the back of the assembly with the slots in the fender. Engage the lower clipon the frontof the lamp assembly, keeping the upper tabon the parkinghrn signal lampassembly inboard of the headlamp bracket tab. 8. To align the parking/turn signallamp assembly with the headlamp assembly, lift up the parking/turn signal lamp assembly until the upperedge is contacting the fender. 9. Fasten the parking/turn signal lamp assembly to the headlamp assembly with the thumb screwused in Step 1. 4. Remove the bulb holder by pressing four retaining the tabs and pulline the holder away from the assembly. 6-37