1998 Pontiac Bonneville Owner's Manual - Page 273

2. Push it back in all the way, wait three seconds and then pullit back out again. If the fluid levelis low, add only enough the proper of fluid to bring the level the cross-hatched area on into the dipstick. 1. Pull out the dipstick. 2. Using a long-neck funnel, add enough fluid at the dipstick hole to bring to the proper level. it It doesn't take much fluid, generally less than one pint (0.5 L). Don't oveflll. ~ NOTICE: 3. Check both sidesof the dipstick, and read the lower level.T h e fluid level must be in the cross-hatched area. 4. If the fluid level is in the acceptable range, push the dipstick back in all way. the W recommend you use only fluid labeled e DEXRON@-III,because fluidwith that labelis made especially for your automatic transaxle. Damage corused by fluid other than DEXRON-111 is not coveredby your new vehiclewarranty. 3. After adding fluid, recheck the fluid level as described under "HOW to Check." 4. When the correct fluid level obtained, push the is dipstick backin all the way. How to Add Fluid Refer tothe Maintenance Schedule to determine what kind of transaxle fluid to use. See "Recommended Fluids and Lubricants" in the Index. 6-22