2012 Subaru Impreza Owner's Manual - Page 188

3-24 Instruments and controls & Turn signal indicator lights These lights show the operation of the turn signal or lane change signal. If the indicator lights do not blink or blink rapidly, the turn signal bulb may be burned out. Replace the bulb as soon as possible. Refer to "Replacing bulbs" F11-39. "Acc" or "LOCK" position, and then turn it again to the "ON" position. . If this indicator light and the CHECK ENGINE warning light/malfunction indicator light flash simultaneously during driving, have the vehicle checked by your nearest SUBARU dealer. & Driver's control center differential auto indicator light (STI) & Cruise control set indicator light This light illuminates when vehicle speed has been set to use the cruise control function. & High beam indicator light This light shows that the headlights are in the high beam mode. This indicator light also illuminates when the headlight flasher is operated. & Front fog light indicator light (if equipped) This indicator light illuminates while the front fog lights are illuminated. This light functions while the ignition switch is " ON " . When illuminated, it indicates that the driver 's control center differential is set to the auto mode. It turns off when the driver 's control center differential is set to the manual mode. For details, refer to "Driver's Control Center Differential (DCCD) (STI)" F7-18. ! Driver 's control center differential auto [+] indicator light When the AUTO [+] mode is set, the AUTO [+] indicator light illuminates. For details, refer to "Driver 's Control Center Differential (DCCD) (STI)" F7-18. & Cruise control indicator light This light illuminates when the "CRUISE" main switch is pressed to activate the cruise control function. & Headlight indicator light This indicator light illuminates when the headlight switch is placed in the " " or " " position. NOTE . If you press the "CRUISE" main switch button while turning the ignition switch "ON", the cruise control function is deactivated and the cruise control indicator light flashes. To reactivate the cruise control function, turn the ignition switch back to the