2012 Subaru Impreza Owner's Manual - Page 320

7-30 Starting and operating ing engine operation, the mode of the Vehicle Dynamics Control System will be changed. ! Vehicle Dynamics Control mode When the ignition switch is on, this mode is selected. This mode enables all controls for ABS, the Traction Control System, and the Vehicle Dynamics Control system. Select this mode for most driving situations. When this mode is selected, the indicator light on the combination meter turns off. ! Traction mode This mode restricts the functions of the Traction Control System and Vehicle Dynamics Control system and thus delays utilizing their functions as a reaction to vehicle behavior in comparison with the Vehicle Dynamics Control mode. This mode should be used in driving situations where the vehicle dynamic performance will improve without decreasing engine torque control. When the switch is pressed briefly during engine operation, the indicator light on the combination meter illuminates in green. When the switch is pressed again to reactivate the Vehicle Dynamics Control system, the indicator light turns off. ! Vehicle Dynamics Control OFF mode This mode allows only the ABS control. This mode should be used in an emergency situation such as getting out of snow or mud. When the switch is pressed for more than approximately 3 seconds during engine operation, the indicator light on the combination meter illuminates in yellow. When the switch is pressed again to reactivate the Vehicle Dynamics Control system, the indicator light turns off. tem. Do not deactivate the Vehicle Dynamics Control system except when absolutely necessary. . Even when the Vehicle Dynamics Control OFF mode is selected, components of the brake control system may still activate. When the brake control system is activated, the Vehicle Dynamics Control operation indicator light illuminates. & Vehicle Dynamics Control OFF switch (except STI) NOTE . The Vehicle Dynamics Control system will be activated automatically when the engine is started. . If the switch is held down for 10 seconds or longer, the indicator light turns off, the Vehicle Dynamics Control system is activated, and the system ignores any further pressing of the switch. To make the switch usable again, turn the ignition switch to the "LOCK" position and restart the engine. . When the Vehicle Dynamics Control OFF mode is selected, the vehicle's running performance is comparable with that of a vehicle that does not have a Vehicle Dynamics Control sys- Indicator light