2008 Yamaha Motorsports RS Viking Professional Owners Manual - Page 23
2008 Yamaha Motorsports RS Viking Professional Manual
Page 23 highlights
Control functions ECS00740 CAUTION: Do not shift from forward to reverse or from reverse to forward while the snowmobile is moving. Otherwise, the drive system could be damaged. ESU10710 Shroud latches EWS00060 WARNING G G Always set the parking brake before attempting to start the engine. Never run the snowmobile with the parking brake applied. This may overheat the brake disc and reduce braking ability. To open the shroud, unhook the shroud latches, and then slowly raise the shroud forward until it stops. When closing the shroud, slowly lower it to its home position, and then hook the shroud latches. ESU12560 Shift lever The shift lever is used to shift your snowmobile into drive, reverse, or low. After coming to a complete stop, pull the shift lever out, turn it to the desired position ("D", "R", or "L"), and then release it. 1. Shroud latch 2. Shroud ECS00140 CAUTION: Make sure that all cables and wires are in place when closing the shroud. EWS00080 WARNING G 1. 2. 3. 4. Shift lever "D" Drive (forward) "R" Reverse "L" Low (forward) G G Do not drive the snowmobile with the shroud open, unlatched, or removed. Keep your body and clothing away from rotating parts when servicing with the shroud open. Do not touch the hot muffler and engine during or immediately after operation. NOTE: Make sure that the shift lever is completely shifted into position. 17
![](/manual_guide/autos/2008-yamaha-motorsports-rs-viking-professional-owners-manual-e2cf12b/23.png)