2008 Yamaha Motorsports RS Viking Professional Owners Manual - Page 68

2008 Yamaha Motorsports RS Viking Professional Manual

Get 2008 Yamaha Motorsports RS Viking Professional PDF manuals and user guides View all 2008 Yamaha Motorsports RS Viking Professional manuals

Page 68 highlights

Periodic maintenance 2. Remove the locking pin. 1. Bulb holder 5. 6. Remove the bulb. Install the new bulb, and then hook the bulb holder onto the headlight unit. Bulb type: Halogen bulb 1. Locking pin 3. ECS00620 CAUTION: Keep oil and your hands away from the glass part of the bulb or its life and illumination will be affected. If the glass is oil stained, thoroughly clean it with a cloth moistened with alcohol or lacquer thinner. Turn the headlight beam adjusting screws in or out to adjust the headlight beams. The headlight beams move as follows depending on the turning direction of the headlight beam adjusting screws. G Direction (a): Down and to the left G Direction (b): Up and to the right G Direction (c): Down and to the right G Direction (d): Up and to the left 1. Headlight beam adjusting screw 4. Install the locking pin, and then close the shroud. ESU12290 1. Do not touch the glass part of the bulb. Fittings and fasteners Check the tightness of the fittings and fasteners. Tighten in proper sequence and torque if necessary. 7. 8. Install the bulb holder cover, and then connect the headlight coupler. Close the shroud. ESU12250 Adjusting the headlight beams 1. Open the shroud. 62

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
Periodic maintenance
62
5.
Remove the bulb.
6.
Install the new bulb, and then hook the
bulb holder onto the headlight unit.
CAUTION:
ECS00620
Keep oil and your hands away from the
glass part of the bulb or its life and illumi-
nation will be affected.
If the glass is oil stained, thoroughly clean
it with a cloth moistened with alcohol or
lacquer thinner.
7.
Install the bulb holder cover, and then
connect the headlight coupler.
8.
Close the shroud.
ESU12250
Adjusting the headlight beams
1.
Open the shroud.
2.
Remove the locking pin.
3.
Turn the headlight beam adjusting
screws in or out to adjust the headlight
beams. The headlight beams move as
follows depending on the turning direc-
tion of the headlight beam adjusting
screws.
●
Direction (a): Down and to the left
●
Direction (b): Up and to the right
●
Direction (c): Down and to the right
●
Direction (d): Up and to the left
4.
Install the locking pin, and then close the
shroud.
ESU12290
Fittings and fasteners
Check the tightness of the fittings and fasten-
ers.
Tighten in proper sequence and torque if nec-
essary.
1.
Bulb holder
Bulb type:
Halogen bulb
1.
Do not touch the glass part of the bulb.
1.
Locking pin
1.
Headlight beam adjusting screw