2008 Yamaha Motorsports RS Viking Professional Owners Manual - Page 27
2008 Yamaha Motorsports RS Viking Professional Manual
Page 27 highlights
Control functions 1. Passenger seat bolt 2. Passenger seat and backrest ECS00230 CAUTION: Make sure that the wire harness is not pinched when installing the passenger seat and backrest. 3. Install the passenger seat bolts, and then tighten them to the specified torque. 3. Install the passenger seat bolts, and then tighten them to the specified torque. Passenger seat bolt tightening torque: 47.5 Nm (4.75 m·kgf, 34 ft·lb) ECS00210 CAUTION: When using the rear storage area, do not load any cargo that is too large for it. In addition, cargo must not project from the edges of the rear storage area. To install the passenger seat and backrest 1. Open the rider seat. (See "Storage compartment" for details.) 2. Remove the passenger seat bolts, insert the hooks on the bottom of the passenger seat and backrest into the slots in the rear storage area, and then slide the seat and backrest forward. ESU10850 Tow hitch Use the tow hitch within the specified weight limits. 1. Tow hitch Tow weight limit: 120 kg (265 lb) Vertical weight limit: 15 kg (33 lb) ECS00240 CAUTION: To prevent early wear of the V-belt, avoid traveling under 10 km/h (6.2 mph) when towing for long periods. 21