2008 Yamaha Motorsports RS Viking Professional Owners Manual - Page 67

2008 Yamaha Motorsports RS Viking Professional Manual

Page 67 highlights

Periodic maintenance ECS00350 CAUTION: Ride on fresh snow frequently. Operating on ice or hard-packed snow will rapidly wear the slide runners. ESU12190 Lubrication Lubricate the following points with the specified grease. EWS00510 WARNING G 1. Lubrication point ESU12210 G Apply a dab of grease onto the cable end only. Do not grease the throttle cable because it could become frozen, which could cause loss of control. Be sure to have a Yamaha dealer lubricate the front and rear suspensions. Lubricant: Low-temperature grease Replacing a headlight bulb EWS00530 WARNING Keep flammable products and your hands away from the hot bulb until it has cooled down. 1. 2. 3. Open the shroud. Disconnect the headlight coupler. Remove the bulb holder cover. 1. Throttle cable end 1. Bulb holder cover 4. Unhook the bulb holder by pushing it in, then upward. 1. Lubrication point 61

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Periodic maintenance
61
CAUTION:
ECS00350
Ride on fresh snow frequently. Operating
on ice or hard-packed snow will rapidly
wear the slide runners.
ESU12190
Lubrication
Lubricate the following points with the speci-
fied grease.
WARNING
EWS00510
Apply a dab of grease onto the cable end
only. Do not grease the throttle cable be-
cause it could become frozen, which
could cause loss of control.
Be sure to have a Yamaha dealer lubri-
cate the front and rear suspensions.
ESU12210
Replacing a headlight bulb
WARNING
EWS00530
Keep flammable products and your hands
away from the hot bulb until it has cooled
down.
1.
Open the shroud.
2.
Disconnect the headlight coupler.
3.
Remove the bulb holder cover.
4.
Unhook the bulb holder by pushing it in,
then upward.
Lubricant:
Low-temperature grease
1.
Throttle cable end
1.
Lubrication point
1.
Lubrication point
1.
Bulb holder cover