2008 Yamaha Motorsports RS Viking Professional Owners Manual - Page 63

2008 Yamaha Motorsports RS Viking Professional Manual

Page 63 highlights

Periodic maintenance If excessive free play is felt, consult a Yamaha dealer. To adjust the handlebar height 1. Remove the handlebar cover. ECS00570 CAUTION: Make sure that the projection on the handlebar is not installed into the area shown. 1. Handlebar cover 2. Loosen the handlebar bolts. 1. Area where projection cannot be installed 4. 1. Handlebar bolt Tighten the handlebar bolts and install the handlebar cover. Handlebar bolt tightening torque: 23 Nm (2.3 m·kgf, 17 ft·lb) 3. Move the handlebar up or down to adjust the handlebar height to the desired position. 57

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88

Periodic maintenance
57
If excessive free play is felt, consult a Yamaha
dealer.
To adjust the handlebar height
1.
Remove the handlebar cover.
2.
Loosen the handlebar bolts.
3.
Move the handlebar up or down to adjust
the handlebar height to the desired posi-
tion.
CAUTION:
ECS00570
Make sure that the projection on the han-
dlebar is not installed into the area shown.
4.
Tighten the handlebar bolts and install
the handlebar cover.
1.
Handlebar cover
1.
Handlebar bolt
1.
Area where projection cannot be installed
Handlebar bolt tightening torque:
23 Nm (2.3 m·kgf, 17 ft·lb)