2008 Yamaha Motorsports RS Viking Professional Owners Manual - Page 57
2008 Yamaha Motorsports RS Viking Professional Manual
Page 57 highlights
Periodic maintenance 2. Rotate the secondary sliding sheave clockwise and push it so that it separates from the secondary fixed sheave. 1. Secondary sliding sheave 2. Secondary fixed sheave 3. Pull the V-belt up over the secondary fixed sheave. 1. Edge of the secondary sheave assembly 2. V-belt position Standard V-belt position: From 1.5 mm (0.06 in) above the edge of the secondary sheave assembly to 0.5 mm (0.02 in) below the edge. 1. V-belt 6. 4. 5. Remove the V-belt from the secondary sheave assembly and primary sheave assembly. Temporarily install the new V-belt on the secondary sheave assembly only, and then measure the V-belt position. Do not force the V-belt between the sheaves; the secondary sliding and fixed sheaves must touch each other. If the V-belt position is incorrect, adjust it by removing or adding a spacer on each V-belt position adjusting bolt. 51