3Com 3CRWDR100U-72 User Guide - Page 43
Disabled, WPA-PSK no server, WPA with RADIUS Server see
UPC - 662705484914
View all 3Com 3CRWDR100U-72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Wireless Settings 41 ■ WPA-PSK (no Server) (see page 41) ■ 128-bit WEP (see page 42) ■ 64-bit WEP (see page 43) ■ WPA (with RADIUS Server) (see page 44) Select the required value from the drop down list, and press Apply. Disabled In this mode, wireless transmissions will not be encrypted, and will be visible to everyone. However, when setting up or debugging wireless networks, it is often useful to use this security mode. WPA-PSK (no server) WPA (WiFi Protected Access) provides dynamic key changes and constitutes the best security solution. In a wireless network where not all devices support WPA, WEP (Wired Equivalent Privacy) should be used. Figure 32 WPA-PSK (no server) Screen To enable WPA-PSK: 1 Enter the pre-shared key in the Pre-shared Key (PSK) field. The pre-shared key is a password, in the form of a word, phrase or series of letters and numbers. The key must be between 8 and 63 characters long and can include spaces and symbols. Note that each client that connects to the network must use the same key.