3Com 3CRWDR100U-72 User Guide - Page 73
RIP Parameters, Gateway, Delete, Apply, Enable, Auto Summary, Operation Mode, Disabled, Silent
UPC - 662705484914
View all 3Com 3CRWDR100U-72 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Advanced 71 ■ Gateway - the router used to route data to the network specified by the network address. To add a static route entry to the table, click Add and on the screen that appears type in the network address, subnet mask and router. To change an entry, click Edit and to delete an entry, click Delete. After you have finished making changes to the table, click Apply. RIP Parameters Figure 59 RIP Parameter Screen You can set up RIP independently on both LAN and WAN interfaces. 1 Select the RIP Mode Enable option. 2 Select the appropriate option to enable or disable Auto Summary. Auto Summarization sends simplified routing data to other RIP-enabled devices rather than full routing data. 3 Select the Operation Mode: ■ Disabled - RIP is not enabled for the WAN or LAN interface. ■ Enabled - RIP is enabled for the WAN or LAN interface. The router will transmit RIP update information to other RIP-enabled devices. ■ Silent - RIP is enabled, however the router only receives RIP update messages, it will not transmit any messages itself. 4 In the Version field, select RIPv1 or RIPv2.